04 — Division

Industrial Manufacturing

Your precision instruments were calibrated by a vendor who's never used them in the field.

Vibration Equipment — Laser Alignment — Thermography — Rotor Balancing — Precision Instruments — ISO 1940 • Vibration Equipment — Laser Alignment — Thermography — Rotor Balancing — Precision Instruments — ISO 1940 • Vibration Equipment — Laser Alignment — Thermography — Rotor Balancing — Precision Instruments — ISO 1940 • Vibration Equipment — Laser Alignment — Thermography — Rotor Balancing — Precision Instruments — ISO 1940 • Vibration Equipment — Laser Alignment — Thermography — Rotor Balancing — Precision Instruments — ISO 1940 • Vibration Equipment — Laser Alignment — Thermography — Rotor Balancing — Precision Instruments — ISO 1940 • Vibration Equipment — Laser Alignment — Thermography — Rotor Balancing — Precision Instruments — ISO 1940 • Vibration Equipment — Laser Alignment — Thermography — Rotor Balancing — Precision Instruments — ISO 1940 •

The Problem

You're buying equipment from companies that have never operated it.

Their specs are theoretical. Your tolerances are real. The instrument that reads ±0.001mm on the datasheet gives you ±0.015mm when your technician is measuring a 250-pound impeller at 40°C in a plant that's been running since 1998.

Vendor support means a ticket. You get a callback in 72 hours. Meanwhile, your production line is down and your shift manager is on the phone with procurement trying to find a calibration tech.

±0.001mm

the gap between spec and reality in harsh field conditions

72 hrs

average vendor response time when your line is down

60%

of instrument failures attributed to improper application

Why Only Droz

We manufacture the instruments other companies just resell. Every unit calibrated in our own lab. Every tolerance verified by engineers who use these tools in the field every week. Nobody else controls that chain.

When a Westinghouse engineer reports a reading that doesn't make sense, we don't raise a support ticket. We send the engineer who designed that measurement protocol.

Part of Something Bigger

Our instruments are just the beginning.

We build the hardware. But we also build the software that reads it, the AI that learns from it, and the maintenance programs that depend on it. One vendor for the full lifecycle.

Predictive Maintenance

Our instruments in the field, our engineers reading the data — a PM program that already knows your equipment.

Software Development

Custom platforms built to ingest and visualize data from our instruments without middleware headaches.

Intelligent Construction

Sensors and instruments deployed inside buildings and infrastructure — connected to your BMS from day one.

AI Consulting

Models trained on the data our instruments generate — because the training set is only as good as the hardware behind it.

What We Manufacture

Instruments That Perform When It Counts

Vibration Equipment — Field-Hardened

Portable and online vibration analyzers built by engineers who've used them in petrochemical plants, cement mills, and turbine halls. Not designed for a lab. Tested in the field.

Laser Alignment — Sub-Micron Certainty

Multi-axis shaft and geometric alignment instruments with wireless data transfer. We calibrated these in our own lab. We've aligned over 500 machines with them. We know what the specs mean in practice.

Thermography Equipment — See the Invisible

High-resolution thermal imaging cameras calibrated for industrial environments. Because a 2-degree hotspot in a switchgear panel at 3 AM is the difference between a controlled shutdown and a fire.

Precision Balancing — Zero Tolerance

Field and shop balancing machines for rotors, fans, impellers, and turbines to ISO 1940 Grade G0.4. We operate these machines in our own maintenance division — they have to be right.

Mechanical Precision

Where Thousandths of a Millimetre Determine the Outcome

Every instrument we manufacture is calibrated against traceable references and validated in the same conditions where it will be used. Not a lab. Your conditions.

Gear Train — ISO 6336 Compliant